Portable Depth sounder
50 m waterproof
Unique portable sounder contains a dry cell and a transducer inside.It is used for marine diving, fishing on the small boat or measurement of water depth with 50 m waterproof and anti-impactness.
Distance can be measured by pointing the sensor toward the object and sliding the power switch only. Backlight display helps the easy operation during night time.
Operation by dry cell battery
You can operate with dry cell battery 006p. Auto power off function turns off the power automatically about 10 seconds after you release the power switch.
During sliding the switch on, the display is lits up by built-in light.So you can operate the unit in the night time.
Display : LCD (7 segments)
Frequency : 200khz(Beam Angle : 24)
Depth scale : 0.6-80 m (1.8-260 feet)
Back light : LED
Waterproof : 50m (150feet) depth
Power off : Automaticall ( for about 10 seconds)
Length of float sensor's cable : -
Operating Voltage : DC9V (Dry Cell 006P)
Battery Life : Approximately 500 activations with battery
Weight : Approx. 300g
Dimensions : 42 x 198(L) mm
ซาวเดอร์วัดระดับความลึกน้ำ HONDEX PS-7แบบไม่มีสาย
HONDEX DEPTH SOUNDER PS-7
The PS-7 portable hand held the depth sounder, is designed to monitor the depth in the forward position. Place the transducer end of the unit in the water, the turn the switch (slide switch) on, the switch is released, the depth reading will stay locked on the display, for about 10 seconds, then, it will automatically shut itself off.
NOTE: UNDER WATER USE ONLY
Frequency 200 KHz
Beam Angle 24º ( - 6 dB)
Depth Rang 0.6 ~
Water proof up to 50m
Size 242 x 198mm
For your safety, make certain that the PS-7 operating correctly by testing in shallow water. Also, USE COMMON SENSE while operation, reading in or over weeds, bubbles or fish schools, etc. can result incorrect or erratic reading.
Transducer is built in the top of PS-7 this unit transmits high frequency pulses
(200KHz ) that are converted from electrical energy by the transducer. These pulses radiate from the transducer, to the bottom, and then are reflected back to the transducer. The transducer converts the mechanical vibrations of the retuned echoes to electrical pulses that are amplified and then display on the LCD. These pulses travel approximately
BEFORE YOU THINK PROBLEM, WHEN THIS SOUNDER DOES NOT WORK PROPERLY Even if you proceed as follows, please ask shop you bought.
Press the power
Indicator does not
Polarity + or - of
Dry cell is wrong
Put dry cell
Cell was consumed
Replace new dry
Beam Angle 24º ( - 6 dB)
Function Auto - power – off
Dimension 42 (¢) x 198 (L) mm
Power ( Dry cell S-0069)
Weight Approx. 190g
( including dry cell )